logo
ELASTOMERIC
STRIP SEAL
COMPRESSION SEAL
OMEGA SEAL
SLAB SEAL
PAVEMENT SEAL
FINGER TYPE EXP JOINTS
ARCHITECTURAL
EXPANSION JOINT FILLER BOARD
PVC WATER STOPS
EXPANSION JOINT FILLER BOARD (MASTIK PAD)
PVC HANDRAILS
ELASTOMERIC PAD
CONCRETE FORM LINER
IS:15652/2006
IS:5424/1969
FLOATING ROOF TANK SHEETS
CUSTOMIZED RUBBER & PVC PRODUCTS
DREDGE HOSE
FLY ASH HOSE
CONCERTE RUBBER PUMP ENDHOSE
MUD AND SLURY HOSE
RUBBER HOSE
AIR HOSES
PNEUMATIC HOSE
STEAM HOSE
CHEMICAL HOSE
SAND BLASTING HOSE
RUBBER CHUTES
ROCK DRILL HOSE
WELDING HOSE
NATURAL RUBBER SHEET
NEOPRENE SHEET
NITRILE RUBBER SHEET
EPDM RUBBER SHEET
SILICONE RUBBER SHEET
VITON RUBBER SHEET
CREDENTIALS & CERTIFICATIONS

CONCERTE PUMP END HOSE

Manufacturer & Exporter of Concrete Rubber End Hose & Concrete Pump End Hose. Our product range also comprises of Expansion Joint Systems, Elastomeric Bridge Bearings and Architectural Expansion Joint.

Kanta flex concrete end hoses are designed based on german technology for high performance and discharge of concrete. The inner tube made out of high tensile & abrasive resistance synthetic rubber with 4 layer wire spirally reinforced for working pressure of 85 bar and burst pressure of 200 bar at temperature up to 100 degree c. The high tensile steel wire are spirally reinforced in between the rubber layers. The normal concrete discharge service life under critical usage conditions was observed during trial process was from 10k to 15k and in some cases it has gone up to 18k to 20k where after usage guidelines were followed properly. kanta flex concrete hoses are specially designed as user friendly, with high flexibility and light in weight to suit even adverse site usage conditions. kntaflex concrete end hoses are available in various sizes and length with one end coupling to suit swing statter, putz mizer, greeves pumps. The size, length of concrete end hose and fittings can be designed and customized as per customer requirements.

The normal standard sizes of concrete end hosed available in ready stock are

 .5" x 3meter

.5" x 4meter

.5" x 6meter

methods for handling hose to achieve best service life of concrete end hose, the handling and after usage maintenance is very important. After usage the concrete end hose shall be cleaned and washed properly to avoid blockages or residue formed inside during concrete discharge. the hose has to be stored under an enclosed area and it shall not be directly exposed to sunlight. the hose shall be placed in straight and shall not be stored in bending position to avoid permanent stress at bending radius. physical handling during shipment is very important. It is observed in many cases that mishandling resulted in damages of end fittings and failure of hoses. Thus the concrete end hose shall be handled smoothly during shipment and storage.

 


Copyright@hitechrubber.in   Powered By IconnectSmart
This site is best viewed Google Chrome,Mozilla firefox,IE 6.0 & above with 1024x768 resolution.